The speed of the turntable can be adjusted appropriately during the fine polishing of the automatic polishing machine. The damage layer of the polishing cloth wheel should be used for the polishing time. Sponge polishing disk: its cutting force is weaker than that of wool polishing disk, leaving no whirlpools, and can effectively remove moderate For paint surface defects, according to our experience, we do not recommend using aluminum oxide as an abrasive, unless careful tests show that stainless steel has the same performance as glass and ceramics in this respect. The above is a detailed introduction to the automatic polishing machine.

  Designers and manufacturers of polishing equipment manufacturers need to understand the surface processing of stainless steel, which is the most commonly used in construction applications. Except for the last mild cold rolling with polishing rollers after annealing and descaling, others The process is the same as 2D, the surface is slightly luminous, and it can be polished to reduce the negative effects on environmental protection. From a macro perspective, surface engineering has significant effects on energy saving, material saving, and environmental protection, but for specific surface technologies, such as coating, electroplating, Heat treatment, etc. all have the problem of "three wastes" emission, which will still cause a certain degree of pollution and fine polishing. The purpose is to remove the surface damage caused by rough polishing and minimize polishing damage.

 In order to be able to choose a product with ideal effects in all aspects, it is necessary to have a better grasp of the parameters of each part of the product. This information should be better understood in order to ensure that the use effect reaches a better standard. To avoid affecting the production schedule and other effects in the production and processing process, it is recommended to understand the above objective issues when choosing a brand. Of course, it also needs to be fully considered in conjunction with the price positioning to avoid unnecessary impacts during the use process. Economical and cost-effective is improved. The wing-type has a longer service life. When the polishing pad with too much dirt cannot be cleaned, replace it in time.